maandag 30 november 2015

Arduino_KY-024_Linear_magnetic_Hall_sensors

Arduino_KY-024_Linear_magnetic_Hall_sensors


Hardware

  • D0 (Digital Signal) Arduino D3 Only needed for "Digital script"
  • + +5V
  • G GND
  • A0 (Analog Signal ) Arduino A0 Only needed for Analog script"

Digital

When the linear Hall sensor detects a magnetic signal Arduino LED (pin 13)  (and led on module) flashes Arduino.


Analog

Value depends on position of magnetic field
Without magnet 523, with magnet between 417 and 730


More info


https://tkkrlab.nl/wiki/Arduino_KY-024_Linear_magnetic_Hall_sensors


Geen opmerkingen: