![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh4wyfTpLWucWOIdPUU0ZftQ_2jaAgLJIbYrLphFlHKYG9Dss_SGsQnpUTZtlSliK_D3WFKZvDm7fyR4MGO01jF6tHXKps_2tgdRuKv75gc_SjnWWRJ4u6xcLzr0y0m4-EZCNtZMrHI6Pku/s280/IMG_20170506_110354.jpg)
A few days ago i did built this cheap function signal generator.
For less than 2 euro this DIY kit provides a Sine, Square and Triangle signal.
(You can find this kit for different prices on AliExpress. I payed € 1,69 , when writing this blogpost i noticed the price has droped to € 1,61 at the same seller. )
Search for it with keywords ICL8038 Monolithic Function Signal Generator Module DIY Kit Sine Square Triangle )
The kit is designed for a frequency range
of 50-5KHz, two bands with a switch S.
of 50-5KHz, two bands with a switch S.
RP1 is the frequency adjustment,
RP2 on the PCB is the duty cycle adjustment and
RP3 on the PCB is a sine wave distortion adjustment.
According to the description the circuit uses 12V single power supply.
RP2 on the PCB is the duty cycle adjustment and
RP3 on the PCB is a sine wave distortion adjustment.
According to the description the circuit uses 12V single power supply.
After testing it with 12 Volt i tried other input voltages. I also worked on 9 Volt so it can be easy battery powered. The Square signal is stronger than the two other signals
No comments:
Post a Comment